gen 5 swap

[nicks98gtp]

found a great deal on a gen 5 kit, and i was curious as it the gen 5 intake would bolt up to the l67 heads? and anything else i would have to do to run the gen 5 setup on a basically stock l67?

 

[Silver GTP]

Yes, it will bolt up. You will need an adapter to bolt your throttle body up to the Gen V and you will have to modify the evap to work with it or delete it.

 

[copgtp]

There is a good thread over at clubgp about the gen V swap

 

[TheOtherNick]

all you have to do is plug the evap hole on the gen v and run a hose from the pcv nipple to fresh air after the maf sensor.