• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

gen 2 daytona, 40th, and special edtion spoiler

Matt Palm

Matt Palm

WHERES THE LAMB SAUCE?!?!
if i got a gen 2 and went to a jy and got a deck lid and drilled new holes the spoiler would cover the existing holes correct?
 


It will not cover the existing holes. You can go with the SLP version which sits a little higher on the trunk and uses the stock holes.
 
i was just thinking if i could find one cheap on here and just go to a junk yard and find another trunk lid
 


will not cover.

You can do what I did. When I went from a stock to a Daytona spoiler, I bought a deck lid w/o a spoiler from a junk yard. Then had the deck lid and SE spoiler painted silver. Then drilled and mounted
 
What I did was drill the holes for the new spoiler and bondo over the existing holes that show. Got painters tape and taped around the holes I bondo'd. And painted the bondo area and wet sanded with a 1000 grit sponge. I also painted the spoiler beforehand and once everything was done put the spoiler on. But if you never did any kind of bondo or paint work I would take it to a professional.
 
You must log in or register to reply here.
Back
Top