Gen 1 zzp billet fuel logs bolt source

[CrazyGuy03]

So I see these attach to the valve cover, meaning I would need longer valve cover bolts am i correct?
I did find longer bolts but not sure how to take the sleeve off the stock valve cover bolt that holds the grommet without breaking it

thanks

 

[Turbocharged400sbc]

the bolt just taps out of the sleeve. never had a problem just laying em upside down on the vise and popping the bolt out with a small screwdriver and a tap with a hammer

 

[CrazyGuy03]

Thanks I will try to swap them out tonight

 

[Turbocharged400sbc]

yeah..."try"

if you cant dont bother coming back

lol

 

[BillBoost37]

James..I'll ban him if he doesn't succeed

 

[CrazyGuy03]

Cmon now I been doing pretty well all these years figuring crap out on my own.....
i just need to make sure im not doing everything the hard way again!

 

[CrazyGuy03]

So I was able to work this out with the correct bolt size and type. If anyone else has these relics laying around , PM me I'll dig out the bolt info for you
The valve cover bolts I used a pressed and a old exhaust stud from the head - popped out like butter. Don't trying pulling it out using vise grips - doesn't work.