gauge recommendations.

[BoostJunki3]

so i have a 3 gauge pod where my DIC used to me on my dash molded in...

im going to fill it with a Aeroforce, AEM Uego, and Autometer ES boost.

i also have a lower dash cubby with 2 gauge holes....currently in FS section.

should i keep the lowers and put a fuel pressure and oil pressure setup? or are my 3 gauges up top enough to have for a dialed in tune/3.2 or 3.4 e85 setup?

 

[minichopper6hp]

You want a oil pressure gauge trust me.

 

[Bio248]

oil pressure, wide band, fuel pressure.

then get a HUD pod one for boost and volts.

 

[BoostJunki3]

oil pressure, wide band, fuel pressure.

then get a HUD pod one for boost and volts.

i have aero which reads volts, and have a boost ....

looks like oil fuel pressure and oil pressure is a must huh.....which of these 5 will i look at least? can the fuel and oil pressure be down in the cubby?

 

[Bio248]

fuel and wideband can be in the cubby. oil pressure is something you always want to peek at, same with boost and volts.

 

[BoostJunki3]

prob just gonna get the aeroforce oil pressure add on....65$ that way i cna have 3 gauges....boost, Aero(monitoring oil psi and volts, with indicator lights flashing with KR) and a wideband.....that should be good enough.....