• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gauge lights

1996pontiac

1996pontiac

New member
I have a 99 gtp. All my lights are out on my gauge cluster. Would they be 1/4 turn and they come out or do i need to solder new ones in? Also i am looking to change the color. Is that the bulb or the inlay/
 


they turn out, and to change color you need overlay or remove the red coating from the back which is a b1tch.
 
i didnt have an issue on mine, as long as it lays flat there will be no issue. Just make sure you know what you idle rpm is and gps the speed unless you have a hud. the temp and gas gauge are a no brainer, and if you get an overlay it will be lighted, but you need to replace the lights so your needles will be lit
 


You must log in or register to reply here.
Back
Top