Gauge cluster+ wheel speed
- Thread starter TimMcCallum
- Start date
- Status
HighOctaneRacing
New member
Go to an auto parts store and purchase a Haynes manual for your car and look at the wiring schematics for the cluster. the schematics will show you where the grounds are. Also I have a 97 cluster for sale if you want one
TimMcCallum
Banned
P1350 and p1441
BillBoost37
New member
And..what do you think the names are for those codes?
TimMcCallum
Banned
No idea
BillBoost37
New member
Google it retard
TimMcCallum
Banned
I did. But they just come up as evap. Which I had tuned out.. Sooo
BillBoost37
New member
The first one does not
If you had evap tuned out, you wouldn't be getting a code for it.
If you had evap tuned out, you wouldn't be getting a code for it.
Russosaur
Moderator
Below Average Joe
New member
You didn't google hard enough.......read then get back to us.
TimMcCallum
Banned
I dont see how it could be the icm.
Scottydoggs
Killa Bee
if you got a code for it, theres something wrong with it. codes hold the key always. icm's go bad all the time too.
TimMcCallum
Banned
I swapped the icm out for another one I had laying around. Both were on a running driving car
Scottydoggs
Killa Bee
did you bolt the ground up?
Below Average Joe
New member
then check the wires and ground
BillBoost37
New member
The code isn't throwing itself for the heck of it. Read up til your eyes bleed and if you can.. look at the actual GM diagnostic aids. I know you might have access to it.
TimMcCallum
Banned
Im gonna take the icm and clean ground up
- Status