• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Fuel trims off

R

rickisrad

New member
I am having issues with my fuel trims being off. There are no exhaust leaks, the o2 sensor is new, and I can not find a vacuum leak. The MAF is a “newer” Delphi. Probably about a year old. What am I missing? Maybe a bad MAF but the readings seem ok. I tried to tune the trims but they keep going off. They are all over the place. Any suggestions?
 


They are low and high. It fluctuates.

I have tested fuel pressure and it is good but I did not test it over a period of time. I am running an AEM high flow pump.
 
I have an AC Delco Maf on order just in case. I will have to get some recent scans and figure out how to post them here.
 
I cleaned off the MAF again and the trims seem to level out. I am thinking the METH injection may be messing with it. I adjusted the meth so it doesn't inject at a lower boost. So far it is running better.
 
You must log in or register to reply here.
Back
Top