• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Fuel Pump Question!!!!

R

rafidiffut

New member
Hey, i have a 1998 GTP and my fuel pump just went bad. I heard from someone that there is a compartment in the trunk for easy access to the pump. Does anyone know if thats true? Or whats the easiest way to change it?
 


I have an 88 and have to pull tank. You might have access from under back seat or deep in the trunk - I hope so for your sake - get a book at a parts store. Good luck
 
Time to get to work. Fuel pump arrived:
35b4977f.jpg


Started fuel pump replacement. GM was kind enough to design an access panel in the trunk area. Which is easy to get to via the back seat. Removed the nuts holding it down and here is the module it's in. You can see I had already started removing the lines:
e3a5e0f6.jpg


Clip was removed with a screwdriver:
beb85755.jpg


a16fc11b.jpg


ded928a7.jpg


495eae45.jpg


Pump and bucket dismantled:
a18ca951.jpg


All back together and ready for reinstall:
280fac8a.jpg


My post from another forum when I installed the racetronix.

Are you 100% sure it's the fuel pump? I thought mine had gone out, replaced it and its not priming. I'm having a completely different issue that has nothing to do with a fuel pump.
 
txslow6 said:
Are you 100% sure it's the fuel pump? I thought mine had gone out, replaced it and its not priming. I'm having a completely different issue that has nothing to do with a fuel pump.
Click to expand...


Well i changed already the fuel pump resistor earlier this year. I even bent the pin in the relay box to see if it started but nothing. I cant't even hear the pump at all. I put in in ON with out starting it and u usually hear the pump kick in but nothing at all. You think is something else?
 


rafidiffut said:
Well i changed already the fuel pump resistor earlier this year. I even bent the pin in the relay box to see if it started but nothing. I cant't even hear the pump at all. I put in in ON with out starting it and u usually hear the pump kick in but nothing at all. You think is something else?
Click to expand...

I hope for your sake it's just the pump man. Heres a link to my thread:
http://www.grandprixforums.net/no-power-fuel-pump-relay-pcm-49836.html

Just make sure you test that the pump is getting power, before spending the coin.
 
You must log in or register to reply here.
Back
Top