• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Fuel lines help! Finishing swap

Z34Phoenix

Z34Phoenix

Florida Tuner
Ok for my swap from the lq1 to l36 I need different fuel lines. The shop doing it hasnt made any progress and I'm taking the car home to finish myself. So what is the best way to join the lines? They had me pick up compression fittings from lowes. They are brass. I have a set to join at metal and plastic. The 5/16 and 3/8th. Is there something safer to use? Will compression fittings hold the 60+ psi
 


compression fittings are designed for hundereds of psi of pressure..

I have never gotten to carried away with hardlines and used hose clamps on rubber with a stainless braid around it on all of my fiero projects. Its simple, cheap and serviceable.... and you can hybrid the idea by putting hard line inbetween.

Example.. fuel rail to rubber to hardline to rubber to car fuel lines.
 
ok lines are done. wasn't as bad as i thought it would be. used a pipe/tube cutter so no worry about shavings!!!
IMG_1101.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top