• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Fuel injector help !!!!

Status
Not open for further replies.
GTPAIELLO

GTPAIELLO

New member
Hi ! I'm kinda new to the forum and have got a lot of good info so far, so here's my issue . I have 60# injectors and need to add them to my hp tune . Pretend you are writing a write up for " injectors for dummies " lol ! I have no clue how to dial them in or adjust ect . Is there a easy way ? I need this done so I can start my base MAF tune . Thanks a lot !!
 


Ported intake ,ported SC, lim, intercooler , smaller pulley , billet fuel rails, adj fuel pressure regulator
 
That's pretty damn vague.

I ran stock injectors down to a 3.2" pulley.

If you're on pump gas there is no need for 60's.
 


Sorry man that I don't specifics it's my brothers car this is his account I'm just trying to help him get it going , he already has them they are in the car now I just need some help adjusting them , any help is greatly appreciated
 
Ok mod list lol
Current mods -zzp inlets and outlets ported sc. -ZZP ported lower intake -ZZP stage 2 tb and tb spacer. -cold air intake - tog
headers and downpipe -ZZP fuel logs. -60 lb injector -180 stat -103 spark plugs - 10.5 mm wires - ZZP stage 2 intercooler. 3" pulley
 


Do both, then upload at same time.

I'd also pulley up...because if it starts knocking...a larger pulley is going to be way more forgiving.

Hopefully you have a wideband as well.
 
Yeah I do have a wideband I'm installing this weekend . So just put the pulley on while tuning then swap back after ??
 


A third thread about the same thing that's been answered 5 times? Yeah..I'm locking this.. please continue in one of the other threads.
 
Status
Not open for further replies.
Back
Top