• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

front speakers

J

jhintz

New member
Hey guys recently replaced the 5 1/4s in the doors on my 02 gt coupe with some 6.5 hertz components. Have a rf 400.2 punch amp to run them but I can not seem to figure out how to get the new wires through the door jam, any pointers? Suppose I could brace the door up and take it off the hinges and string them through like that with a coat hanger. I would rather not if I don't have to. Could also splice the new wires into the factory wires inside the car but can't seem to find those either. Everything is so tight under the dash and up high. Any ideas are greatly appreciated. Thanx
 


I just did this saturday. I removed the rubber conduit from the door and the main body frame. I had no problem then feeding it thru without a fish, conduit pops back in easy.
 
That, or just run em through the middle and tie in with the stock speaker wires behind the headunit.

Sent from my A200 using Tapatalk HD
 
Got them in today. Really wasn't as bad as it first appeared. With a coat hanger a pair of needle nose pliers and a straight screw driver I had the wires ran in about 10 mins. Took longer to get panels off, thanx guys. The components are now screaming with the power from the rf 400.2
 
You must log in or register to reply here.
Back
Top