Scottydoggs
Killa Bee
sounds like your air bound. grab a little kid riding by on his bike lol
F body brake upgrade question
- Thread starter Austins01GP
- Start date
Austins01GP
New member
Haha I'll go find that kid!
Which one of the four connectors between the BMC and ABS module do I crack open?
and do I have to re-bleed the brakes or just the abs?
Which one of the four connectors between the BMC and ABS module do I crack open?
and do I have to re-bleed the brakes or just the abs?
Scottydoggs
Killa Bee
start with the 2 off the master. if that dont do it, start hitting the other lines off the abs.
you'll need to bleed each one 3 or 4 times easy. make sure whoever is holding the brakes holds them to the floor until you make the bolt tight again, or it will suck air back in, same goes for the calipers for the bleeders.
doing this is as close to bench bleeding the master as can be, short of taking it off and doing it right. keep the master full too. try not to let go lower then a 1/4 full.
then id give the calipers anther shot of bleeding as well.
dont know if you have some vac line, but if you put the wrench on the bleeder, then a vac line on the nipple, then the line into a bottle. it makes for mess free bleeding. brake fluid takes nice fresh paint off fast.
you'll need to bleed each one 3 or 4 times easy. make sure whoever is holding the brakes holds them to the floor until you make the bolt tight again, or it will suck air back in, same goes for the calipers for the bleeders.
doing this is as close to bench bleeding the master as can be, short of taking it off and doing it right. keep the master full too. try not to let go lower then a 1/4 full.
then id give the calipers anther shot of bleeding as well.
dont know if you have some vac line, but if you put the wrench on the bleeder, then a vac line on the nipple, then the line into a bottle. it makes for mess free bleeding. brake fluid takes nice fresh paint off fast.
Austins01GP
New member
Ok thanks for all the Info man! I appreciate it,
that kid in my neighborhood took off when I chased him for help, and he hasn't come back!!
ill have to wait tip tomorrow I guess:/
that kid in my neighborhood took off when I chased him for help, and he hasn't come back!!
ill have to wait tip tomorrow I guess:/
Scottydoggs
Killa Bee
that little %$@*er lol
REDCRAPGP
New member
http://www.grandprixforums.net/big-bad-brake-thread-39174.html
That should answer your questions and give you a better understanding.
That should answer your questions and give you a better understanding.
Austins01GP
New member
Great thread ^^
And a 98+ fbody is what you need them off of
I know!
I got the kit off of w body store, and it was good to go, all bolts and brackets lined up perfectly
And a 98+ fbody is what you need them off of
Kilroy
New member
Thanks Red/ I searched, but couldn't find it. :th_thumb-up: