• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

exhaust help.

T

t wizzle17

New member
What size adapter do I need for the 3" sd header dp to the exhaust a few inches before the cat ? Ive been everywere and eveyone has diffrwnt sizes. I thought it was 3" to 2.5 but everywere says diffrent
 


The SD header dp will bolt directly to the factory cat back, if you cut off the flange the stock exhaust is 2.25".
 
I'm using stock cat and a few inches before it . So the 3" will bolt up to the 2.25? And would a 3 inch to 2.5 reducer work if I usr a band clamp over 2.25. Like 2.5 to 2.25 work ?
 
Your thinking way to hard about this.

As long as the exhaust is stock the SD will bolt up to it.

You need 2 2.25" bandclamps

And 2 3" bandclamps
 
I think I'm explaining it wrong. I already have the ubend delete . So um not using the 3" one with the ubend delete or the o2 port. So I'm just going from the 3" peivce that bolts up to the flex to the stock piping. Its a .75 diffrenxe ? That won't matter ?
 
You must log in or register to reply here.
Back
Top