• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Exhaust band clamp for speed daddy cross over



I used strap clamps (not stepped), and with enought tightening (45 ft/lbs) they become a perfect stepped clamp. Im not exactly sure of percise measurments of the crossover, I know the 2 1/4 will fit, but im not sure if it goes down to 2 1/8, or bigger.
 
i used strap/band clamps as well... found the 2 1/4 inch ones at napa for 15 bucks... stainless.
 
15 a piece?

So wait, if you used 2 1/4 ones and they crushed down then these are probably the ones. I'm pretty sure the 2 1/4 wouldn't fit over a larger pipe.
 
wait a minute I think I have that wrong. 2 1/4 is the pipe ID, I'm going to assume the clamps are labled based on the pipe ID they are made to clamp. So, now I've just confused myself because that would mean I need a 2 1/4 to 2 3/8 clamp.


maybe these are the ones I need
http://www.jegs.com/i/JEGS/555/30732/10002/-1
 
Last edited:


yeah I'll probably rtv the pipes and then rtv it again between the clamp and pipes.....see that bastard try to leak.
 


You must log in or register to reply here.
Back
Top