I want to hook up a dash cam. The one I bought has a standard cigarette/accessory style plug, but I want to hardwire it to a switched circuit. Can I use a fuse tap to wire it in, and if so, which fuse would be the best one to tap in to? I've read a few posts where members suggest the sunroof, however I don't have one on my car. Thanks!
Electrical question
- Thread starter stealth71
- Start date
BrandonHall10
Solving problems
I'd recommend the "power drop" circuit. If you want to go dirt cheap, you could tap into those wires. Otherwise, ZZP sells a plug/harness. Makes for a clean install. I'm using that circuit and harness to power my Aeroforce.
http://shop.zzperformance.com/store/p/194-Power-Drop-Harness.aspx
http://shop.zzperformance.com/store/p/194-Power-Drop-Harness.aspx
BrandonHall10
Solving problems
Oh, um... Can't say for sure on the '06. Best bet is to look behind/under the glove box. If it's there, you should see it right away.
3 leads. According to the website, one is constant 12v, one is 12v with key on, and one is ground. I know for sure one is keyed 12v power and one is ground, cause that's what I used.
3 leads. According to the website, one is constant 12v, one is 12v with key on, and one is ground. I know for sure one is keyed 12v power and one is ground, cause that's what I used.