• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

ebay headers?

Status
Not open for further replies.


On my '04 I have about 1/8" clearance including the header wrap after the heat shield for the fan was removed. I don't know about later years having thinner units, but if it's the case it good because more clearance would definitely help.
 
Can someone please take some pictures, A million posts of SD SSAC Ebay headers, and not one single picture.. A list of everything needed extra for a complete install would be fantastic if added.. thanks.. I got my SD headers in, and they are sitting in my office, just waiting for the right time..lol
 


These aren't from my car, but I gathered them before I decided to get the speed daddy's. I'll have to take some pictures of mine too. $220 shipped is an awesome deal, especially when you consider they fit just like SLP, which go for about $700.
 

Attachments

  • l_251d78bfae4147d6957b4c0c980e7e1c.jpg
    l_251d78bfae4147d6957b4c0c980e7e1c.jpg
    44.9 KB · Views: 29
  • l_ecd09e253d9a41d3ba681fa21e880e25.jpg
    l_ecd09e253d9a41d3ba681fa21e880e25.jpg
    39.7 KB · Views: 23
  • l_261c9044171c48f89c1d5aa33498e3c2.jpg
    l_261c9044171c48f89c1d5aa33498e3c2.jpg
    49.1 KB · Views: 25
scoobyydooooooo said:
Can someone please take some pictures, A million posts of SD SSAC Ebay headers, and not one single picture.. A list of everything needed extra for a complete install would be fantastic if added.. thanks.. I got my SD headers in, and they are sitting in my office, just waiting for the right time..lol
Click to expand...

its been said before a few times... copper RTV, band clamps for joints, new gaskets...ones that are included suck.
 
@ GTPINSC
its been said before a few times... copper RTV, band clamps for joints, new gaskets...ones that are included suck.
Click to expand...

So, where would the best place be to get some gaskits? WOuld these be available at Autozone or some local auto parts store. I really dont want to order online, I want to get these on, and the ordering just takes to much time.. thanks again.. Oh, and what Clamps? Where are these found as well? Already got some good RTV from ZZP when I ordered some other items.

Wrongway, thanks for the pictures..
 
get gaskets from dealership... get manifold gaskets and catback gasket. they arent that expensive. i got my clamps at napa for like 15-20 bucks each IIRC. i only band clamped the crossover and had slip fit pipe underneath welded. u will need 2 1/4 inch clamps. just ask for band clamps at napa they will know what u mean. theyre prob about 2 1/2 to 3 inches wide.i RTV'd joints.. then came back with a light coat of RTV over the area where clamp is mounted.
 
Thanks for all the help, got mine on a few days ago, not really any issues at all, they went in pretty good, and no leaks noted. I had a great person doing the work though. we did have to bend the tran dip stick, and place an o2 extention on the front sensor. the sensor is basically hitting the fire wall now though, the front bank has one header pipe within 1/8 or less of hitting the radiator.... Any suggestions? any questions? oh, I removed my cat, and egr
 




Status
Not open for further replies.
Back
Top