• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Eatons new supercharger

EmEaston24

EmEaston24

New member
Not exactly sure how new this is but its new to me, and i didnt see any threads about this so here it is.
Clicky!!
It has twin 4 lobe rotors twisted 160 degrees, compared to the gen III-V which has twin 3 lobe rotors twisted 60 degrees.
GenV has max thermal effiencies in the 60% range, TVS is is 70-75%
For the kit it cost roughly 6k (holy $hit!)
one was put on a roush mustang and it saw pretty nice gains of 160hp and 183lb-ft to the wheels.
Heres what it looks like
mmfp_0811_10_z+eaton+tvs_supercharger.jpg

mmfp_0811_11_z+eaton+tvs_blower_bottom.jpg

i was messing around on the eaton site and there was a simulator type deal. i tried it for a 3.8 engine and it came up with 446hp, 586tq. probably blowin smoke up your a$$ tho...
 


the modular motor is built for boost so gains like that are not uncommon. as for the 3800 the GenV is a proven inexpensive way to make power going the route of the blower
 
super old. they made that a LONG time ago. its very ineffective cost wise to consider even trying that blower if youre even handy enough to make an adapter plate since that thing will no way in hell bolt up to our cars.
 
the tvs blower has been out for a while. we installed one on a cobalt ss and made great power with it over the stock m62
 
You must log in or register to reply here.
Back
Top