• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

E-Brake Wires on 2006GP

B

BriDog

New member
Hi all,

I just installed a new cd/dvd player that required the e-brake to be engaged for video playback.

I know this can be bypassed but I prefer to install things properly, and I don't know where to find these wires. Can anybody help?

The stereo's installation guide says it needs to be hooked to the power supply side of the brake.

It's a 2006 Grand Prix

Thanks for the help
 


I am going to be installing the same type install. Did you find the wire? I imagine its just right at the sensor by the e brake and follow it up a bit.
 
I have a 2006 GT and there is only 1 wire. I tapped into it for my DVD deck and it worked fine. It was connected right to the ebrake sensor. The ebrake sensor is direcly connected to the back of the Ebrake.
 
You must log in or register to reply here.
Back
Top