Dyno guessing time. Result: 266 WHP

[matt5112]

I glance at the WB on pulls to ensure its close to what my scans are picking up. They are pretty close.

slope of 2 and intercept of 9.5 seems to work best.

 

[mechguy]

Are you tuned for 91 or 94 octane?

Non related:
From a quick glance it looks like you don't enter PE until ~ 200HP. Interesting.

 

[matt5112]

94.

Which is E10.

Which stoich is 14.1.

 

[Kejross]

Why not just add a bit more fuel and see how the but dyno feels and if you don't knock with added fuel add a couple * of time and see what happens... That or borrow someone else's WB/sensor to verify best 2 of 3 lol

 

[matt5112]

Going to try that.

 

[kuntzie]

why they dyno the car in 2nd?

 

[matt5112]

Thought it was in third.

Unsure why the speed is wrong.

Had to change the tune prevent the 3-2 downshift because it kept spinning on the dyno.

 

[AmericanSoldier]

your torque is WAY LOW..


that car should have more in it, fix it :th_thumb-up:

 

[Kejross]

your torque is WAY LOW..


that car should have more in it, fix it :th_thumb-up:

^what I was thinking when I guessed...

 

[kuntzie]

it was definitely done in 2nd, if the speed was wrong then the dyno would be broken, thats a 2nd gear pull for sure

 

[siLversLeigh]

is your wb before or after the cats? and the dyno's wb? before the cats is more accurate. general rule is add 1pt if after the cats

 

[matt5112]

it was definitely done in 2nd, if the speed was wrong then the dyno would be broken, thats a 2nd gear pull for sure

:th_angry2:

is your wb before or after the cats? and the dyno's wb? before the cats is more accurate. general rule is add 1pt if after the cats

mine is before, theirs was after.

Would explain the difference.

 

[TheOtherNick]

yeah if theirs was after the car that explains the leanness fully

 

[matt5112]

Its 1 pt leaner that surprises me.

Last time I had Will tuning my car, my WB showed 11.0, Will's showed 11.4 installed in the tailpipe.

Regardless, at 76 mph, the engine only spins at 5500 rpm in second gear.

Which means the thing makes more than 266, I need a third gear pull, and this be done wrong

 

[blueguy]

teh failz are strong with you, Canadian.

 

[matt5112]

indeed.

But that is nothing new.

 

[99prixgt]

WAHOO! i won!

what kind of timing are you pulling with that 3.4'' pulley?

 

[matt5112]

16*

 

[02 WS6 TA]

What happened.

 

[matt5112]

I went to a mustang shop.

Had a fail.

And I'm still alive to tell the tale.

Got to see a six second car though.

Thats cool right?