• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Drivers Door Switch Bezel

Bronco Boy

Bronco Boy

Donating Users
Anybody know the trick to getting the mirror switch out of the bezel? I broke the 4 little flat tabs that I thought should just pull out, and it still won't come out.
 


I can't offer any technical help, but maybe some practical help...

Usually, before I dive into any unfamiliar territory (trim piece removal, door disassembly, etc.) I'll "practice" at the U-Pull junkyard.
 
Way ahead of you guys. The one I'm messing with is from the junk yard. The bad part is said junkyard is over an hour away, so I'd rather not have to go get another one.

It's weird, cuz the switch has some play, but something is holding it in place, but the more I stare at it, the more I can't figure it out. LOL
 
Oh, and the reason for me doing this is I had to swap out the door lock switch a few weeks ago, and my buddy offered to help. He pulled the bezel from the wrong end and broke the tab off. And that is why I don't like people "helping" me.
 


It's just those 4 tabs. It's just held pretty strong. Wiggle it lol.

Source: Did window switches 3 times ugh.
 
For future reference, here are the clips that hold the switch in place.....

Mirror_Switch_014.JPG




They can't be removed with the switch in place, so you need to press the switch out, then carefully remove the clips (if you need to remove the clips).
 
Last edited:


You must log in or register to reply here.
Back
Top