downpipe question

[asite57]

if i put a 3" down pipe on mu car from zzp will the trans tube hit it and will i need to bend it?

 

[Fivefingerdeathpunch]

Only headers, sometimes touch the trans dipstick, and thats when you bend it.

A DP is straight bolt in.

 

[asite57]

ok thanks man is that something i can do myself i looked from the top and theres no way but i havent had a chance yet to look from the bottom

 

[bps02gtp]

from the bottom i used a SUPER long extension with i think a 1/2 swivel socket. start soaking that sucker with PB blaster like now lol

 

[asite57]

ive already had my DP replaced with a stock one because the flex broke and was leaking but now it broke again and is leaking again so im just gonna do it my self. the bolts shouldnt be to bad if theyve been off already

 

[bps02gtp]

oh yeah it'll be a piece of cake all around. the hardest part is getting the 4 bolts loose. the 2 after the cat on mine were impossible. fortunately i realized i needed a new resonator anyway so i cut after the resonator and dropped half my exhaust in one piece lol

 

[asite57]

yeah im doing the ZZP catback with off road downpipe thats why im asking, the DP bolts seemed like the only challenge