• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Door trim/molding loose

B

bocou92

New member
my door trim is coming loose and i thought i needed new clippings for it. found out that its just glued on to the door. what the hell kind of glue is used to keep that thing on there that wont **** up the paint for metal on the door?
 


3m trim tape, or the spray, its kinda like rubber cement but better im sure. id tape off the paint around the area before spraying.

or take the door trim off of the inside and pop the clips and then get new clips to hold it tight. a few people have started threads about removing the door trim, and then they find they need to fill the holes for the clips.
 
I used double sided mounting tape made by 3m it holds up to twenty pounds and i bought it at wal mart make sure you clean the surface before you apply the tape good luck
 
alright cool guys thanks. i was thinking the samething about just removing the trim, cleaning it and retaping it instead of taking the trim off and the bottom brace.
 
when you used the 1/2in tape did it look good after finishing the job? like did any of the tape was sticking out?
 


It looked good when I was finished. No tape was sticking out. 1/2 inch is the perfect width for what we need it for.
 
You must log in or register to reply here.
Back
Top