• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Door Dings

spazzz

spazzz

New member
I have 2 dings in my passenger side door, I finally decided these will be on the 2015 checklist.

*****Has anyone had any luck removing door liner and massaging them out by hand? *****

Other than that, I am thinking of the Paintless Dent Repair as the best solution. I have lived with these too long.
Most people will compliment my paint but in the same sentence let me know I have dents in the door.
 


PDR is the way to go. I used to do it for a living. You are going to be pissed off though when you see it takes a skilled tech 5 mins to take them out and you pay over 100 dollars though. It's better than the body shop option though of having them take off the door and etc.
 
if you try the hammer em out deal. id make sure you warm the paint around the dent if you try this in the cold. the paint could just pop off maybe.


ive seen some incredible vids of paint less dent removal. (like a whole quarter panel smashed in and pulled out clean) door dings should be nothing for those guys.
 
Just go to a body shop and they usually have a PDR tech they can call or search for one online, i have friends that do my dings for free
 
Hardgainer said:
Just go to a body shop and they usually have a PDR tech they can call or search for one online, i have friends that do my dings for free
Click to expand...

I have a dent doctor a mile from here. I am going to check it out tomorrow. No doubt will be the PDR solution.
Thanks guys
 


Just have it done by pdr but don't be pissed when you see a skilled tech take your dings out in 5-10 minutes and your out 150 bucks.
 


Won't work, just let the pdr guy do it. i used to do pdr and i laugh at people trying to take dents out without the right equipment such as glue puller, wrong tabs on glue puller, wrong hook tool, wrong window guard, using a reflective board instead of led light. yep used to do it.
 
Hardlyaninch said:
Won't work, just let the pdr guy do it. i used to do pdr and i laugh at people trying to take dents out without the right equipment such as glue puller, wrong tabs on glue puller, wrong hook tool, wrong window guard, using a reflective board instead of led light. yep used to do it.
Click to expand...

I've used dry ice with great results but I did it the right way sooo....
 
You must log in or register to reply here.
Back
Top