DIY Meth injection ?'s

[TEK310]

i have searched and only found sparratic info on this. i have heard of people taping your intake and running your windshield washer nozzles into your lower intake manifold, and using the washer switch to spray at WOT.

pro's and con's of this?


if it is really legit, what position and where on the LIM would you tap and run the nozzles?

i have also been told you dont have to run a tune for it.


how does this work? it just cools the cylinders and keeps knock down at 0? do you tune to actually get power out of meth injection

 

[matt5112]

I don't think the nozzles would work well post blower. you'd have that extra ~10 PSI fighting the nozzles/pump.

 

[Sven the Sexman]

Washer nozzles don't have pressure enough or proper spray pattern. Meth injection typically uses a higher pressure and sprays a very fine mist into the intake.

 

[txslow6]

Local had his setup through the LIM. Worked well for him.

 

[TEK310]

Washer nozzles don't have pressure enough or proper spray pattern. Meth injection typically uses a higher pressure and sprays a very fine mist into the intake.

so i would have to get a high pressure pump and nozzles to make it work.

what about tuning?