• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Disable keyless light flashing?

apierce1289

apierce1289

New member
Is there a way to disable the headlights from flashing with the keyless entry? But still keep the horn noise so you know its locked. It would be cool to disable the lights from flashing. Disable headlights only if possible, I'd still like blinkers to flash so if its dark I know it received the signal from the remote. I can cut and solder the harness if need be. Just need guidance. Need to know if I need resistors or what not to do this etc...

Sent from my XT912 using Tapatalk 2
 


You can do this to have only the corners flash. If not then you have to go into the programming mode to disable the flashing lights. You will also lose the horn if you do that.

ClubGP:
 
apierce1289 said:
Is there a way to disable the headlights from flashing with the keyless entry? But still keep the horn noise so you know its locked. It would be cool to disable the lights from flashing. Disable headlights only if possible, I'd still like blinkers to flash so if its dark I know it received the signal from the remote. I can cut and solder the harness if need be. Just need guidance. Need to know if I need resistors or what not to do this etc...
Click to expand...
An easy option.....

Alarm_Headlamp_Flash
 


You must log in or register to reply here.
Back
Top