• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Did Some Work On the Prix Today....

ljmonnin12

ljmonnin12

New member
Here's the spoiler drainage fix. Man I couldn't believe all the sh!t that was under there.... Gross.
e7bd766c.jpg


Well... I did these a while ago but I fixed the condensation in the headlights and I restored them. But I used the wrong clear coat... Need high temp because now I have bubbles from the clear heating up too much..... Next is clear corners!
a0b0322b.jpg


63446621.jpg


And finally sanded the tips!

d3aca035.jpg
 


What kind of sand paper you use for your tips? And how do you remove the spoiler?
Also, looks good :th_jester:
 
10mm socket takes off the wing.

Lower number grit...then move to higher number grit to smooth it out.
 
Honestly, to tell you the truth I just found some sandpaper that had a not to big and not to small grit size and put it on my sander and went at it took about 2 min. And there is like 5 or 6 bolts that are on the inside of the trunk. just lift the lid and they should be there.
 
Where are the bolts for it though??
And ok thank you about the sand paper. Always wanted to make them look better. Hand sanding ok?
 




I did have it debadged... didn't like the look.. guess it's just a matter of opinion. now i have to get the bumper fixed.
 
yeah. i have a felling the guy that owned it before me got rear ended and just fixed it himself. reason number one: the paint job on the bumper is terrible. number two: as you stated above that the pontiac part is painted white. number three: i can't use my key to open the trunk. and i know for a fact it is not the valet key.
 
You must log in or register to reply here.
Back
Top