• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Delilah....dyno rackar



Re: Her names Delilah. She's still a bit*h...but not as often

ericspecullaas said:
Roger who?
Click to expand...

Roger as in ok. Gotcha. Sounds good. Military has me saying it often.


Any who good things have happened tonight. I have all the intake parts apart cleaned them and doing some painting tomorrow morning. Gotta clean fuel injectors to.

Also didn't get to coil overs today but will tomorrow fo sho
 
Re: Her names Delilah. She's still a bit*h...but not as often

LMFAO your supposed to "out" him if your done with the convo...............
 


Re: Her names Delilah. She's still a bit*h...but not as often

Yea your right. I'm going into the tree line to haze myself now.
 
Re: Her names Delilah. She's still a bit*h...but not as often

Couple pics
Got the wide band all ready. Not installing the sensor till I get headers. Still need power wire and wire to hook up to hptuners. Will take care of that tomorrow
IMG_20131124_155339_247_zpsaac02494.jpg

IMG_20131124_155240_189_zps946adbec.jpg


Also picked up a sealed battery box for relocating battery cause I need the extra room in the engine bay.
 


Re: Her names Delilah. She's still a bit*h...but not as often

Schmidty said:
:th_tongue2:
Click to expand...

this is all your fought. Right when i think i have everything i need to bolt this on and get her running with a few more horses i realize i forgot a couple things.
Any who just ordered the new intake stuff (some bends and silicone couplers heat reflective tape and a 4inch filter). so that stuff is getting shipped to TN for when i arrive Wednesday morning.
 
Re: Her names Delilah. She's still a bit*h...but not as often

DirtDog said:
this is all your fought. Right when i think i have everything i need to bolt this on and get her running with a few more horses i realize i forgot a couple things.
Any who just ordered the new intake stuff (some bends and silicone couplers heat reflective tape and a 4inch filter). so that stuff is getting shipped to TN for when i arrive Wednesday morning.
Click to expand...
Don't forget the 8mm ratchet wrench.and gm fuel line disconnect tool. You'll thank me later for that pita back intake bolt underneath the Alt bracket. Also some 3/8 hose for the evap some masking tape to cover the cylinder heads while you cut. Oh and some xylene or toluene and shop rags to clean out the cylinder ports
 
Re: Her names Delilah. She's still a bit*h...but not as often

Got the 8mm ratchet wrench.
Fuel line tool should be at Oreillys going tomorrow morning
As for the rest. I now have another shopping list lol
 


Re: Her names Delilah. She's still a bit*h...but not as often

Well more progress. Got the new mass air flow sensor bung hole cut. Took about 30 minuted. Gonna weld it in after work. Also no pic at the moment but also put the MAF honey comb stuff in so everything is almost 100% complete

IMG_20131125_152403_567_zpsc539b86a.jpg
 
You must log in or register to reply here.
Back
Top