• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Delilah....dyno rackar



Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

IMG_20131004_181548_613_zps83eeab6a.jpg

New toy. Should work to pull off harmonic balancer
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

you can use that type on the V8?

i would think the other style puller is still what you'd want use. unless the balancer has holes in it for the hooks of that puller.
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

this style. the bolt in kind like we use on the 3800.

00112560.jpg
 


Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

Did u see the link I posted. That's what gm says to use
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

yes i saw it, i dont have a clue what your balancer looks like. just showing you the other style puller.

yours must have slots for the hooks or something. i would not be grabbing it from the outer edge, thats for sure.
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

Yea it has three small slots that the claw should go into
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

Easy....I dunno. Gotta drop cradle some. Then getting the bolt off is gonna be a *****
 


Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

go red neck style on it.


dont you live on base with a garage? and like air tools? and a lift? air gun is the easy way.

 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

The garage on base is closed because our government is incompetent
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

+1 for the redneck trick. Let the starter crack the bolt loose.
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

But I have all the necessary tools now except for a way to lower the motor. I think if I just loosen the sub frame bolts until its low enough I'll be fine. I only need like an inch or two and I could possibly break the bolt loose first
 


Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

put a jack under the sub frame on the pass side, then back the sub frame bolts out a inch or so, then lower the jack, keep the weight on the jack, dont let sub frame hang on the bolts.
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

Do I need to have the wheels off the ground to do that?
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

oh yeah. jack stand at the pinch welds is the only way really.

and take the dog bones off so the engine dont bind up when dropping it a bit.
 
Re: Her names Delilah......wobble wobble, leaky leaky, squeaky squeaky, bit*hy bit*hy

Cool. Anything else I need to do to drop the frame two inches
 
You must log in or register to reply here.
Back
Top