• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Dead Miss on two cylinders

9

99regalLSE

New member
Hi, i am attempting to diagnose a dead misfire on two cylinders. I have a 99 regal n/a with a 3800 series II engine. While driving one day it began idling very rough and lost some power and was driven a few miles home that way and parked. I figured out that cylinders #2 and #5 have a dead misfire, which both share a coil so i figured that was the problem, but after replacing the entire 3 coil assembly with a known good unit there is no change. I am stumped and would some help finding which direction to go from here.
 


before i swapped the coil assemblies i replaced the plugs and wires, and i believe the ignition control module is part of that assembly i swapped
 
You must log in or register to reply here.
Back
Top