• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

DDM Tuning

redlinepontiac

redlinepontiac

New member
has anyone orderd from them and had a problem?

i bought a 9007 6k 35w hid kit, 6 194led bulbs, and a 880 4300k 35w hid kit.

i go to install the 194s...nothing, ok pluged in the 880s, nothing, nothing from the 9007 kit. grrrrrr
 


Damn I just got my kits from them after being on a wait for 6 weeks...ima put mine in tomorrow so I hope mine work
 


the 194s are leds so if you plug them in backwards, they wont work. Just turn them around! And i love my DDM fogs and headlights. THey work great.
 
I've ordered bulbs from them before and the glass casing on the hid bulb was larger than spec, didn't fit in my housing, also the bulbs were horribly mismatched and out of color. They were supposed to be 5000k, and were almost an orange red, and very dim.
 
thanks chamilton89 4 out of the 6 194s worked once i spun them, so 2 still dont work. i plugged the 9007s in and walked away, came back 2 min later one was lit up and working the otherone still isnt and the 880s are just dead. thanks for the help
 
redlinepontiac said:
thanks chamilton89 4 out of the 6 194s worked once i spun them, so 2 still dont work. i plugged the 9007s in and walked away, came back 2 min later one was lit up and working the otherone still isnt and the 880s are just dead. thanks for the help
Click to expand...

Yeah for sure. Ive ordered quite a few things from DDM and ben very happy. Make sure the bulbs work by testing them in the sockets that work and make sure you have the polarity right with your HIDs.
 
DDM has been big in the 3000GT/Stealth world for many years and I don't think I have seen one issue from them. The only complaint people had were not getting instructions.
 


Only issue I had with mine were lack of instructions, but I figured it out ok. I love them. Inexpensive and from what I can tell, pretty good quality.
 
Did you guys have issues pulling the blue connection through the stock screw thing on the light? I had to drill the hole bigger to run it through
 
You know that black thing that screws the lightbulb to the headlamp? I couldn't get the blue connector from ddm to fit through the hole...ill take a picture of it
 


You must log in or register to reply here.
Back
Top