• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

ddm hid fogs wont work

gpgt04

gpgt04

New member
anyone have to hid fogs from ddm. preferably the 880's. i have the relay harness and i cant get it to work for the life of me. the positive it on the fuse block and the ground it under the ground for the battery. i have the male end plugged into the female on the ballast then the female from the harness into the male end attached to the light bulb. and the two pin connectors plugged into the former connection to the fog lights. any tips or suggestions appreciated
 


gpgt04 said:
did you use a relay harness when you hooked them up?
Click to expand...
Don't quote me but I think only 1 ballasts accepts the plug from the relay harness. Unhook the passenger side connection but leave bulb plugged in ballast. I think battery power thru relay harness will ignite bulb and ballast.
 
sometimes the power plug that goes to the ballast needs to be turned upside down. you would think the plug would snap on the tab but it doesnt, turn them around and see if that works
 


You must log in or register to reply here.
Back
Top