• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Cylinder #1 Misfire, Please Help!!!

M

mrt23

New member
I have an 06 supercharged 3.8. I keep getting a cylinder #1 misfire code. Here is what I have done so far: New spark plugs, new wires, replaced coil pack, replaced ignition module, replaced fuel injector, switched spark plugs/wires/coil packs around. I have tested compression and cylinder leakage with excellent results. I have sprayed brake parts cleaner all over the place and did no find any vacuum leaks. I have my scanner hooked up and on the misfire data screen: at idle no misfire, at 1500 rpm no misfire, at 2000 the misfires start showing on the scanner, and at 2500 rpm its shows a lot of misfire on the scanner. Then if I put it in gear and power brake it to 2500 rpm it shows no misfire on the scanner. I've tried everything I can think of to diagnose this misfire problem and if you have an idea or solution I'm all ears. Thanks in advance for your help
 


You must log in or register to reply here.
Back
Top