• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Cutting a hole in the roof

They have spot welds actually i think, not bolts I know that. Rear window has to come out but the windshield should be fine.
 


no bolts, just spot welds and sealant. i would take both front and rear glass out. if your serious about swaping roofs, do it at factory seams if possible
 
That's how im planning. Drill out all the spot welds and remove the back window for sure. IF the windshield needs removed then we'll do that too. I need a new windshield anyway so its not a big deal at all. But then reweld the new roof in and seal it all up so it uses the factory rain channels. No leaky roof.
 


ii'll have to borrow a battery powered saws all and just cut the pillars on the donor car so i can get it nice and easy
 
well when you go to put the new roof on dont butt weld the pillars that would that would comprimise the structual rigidity of the chassis. cut the inner piece say 8in from the top, and then the outer 13in from the top to offset it
 
You must log in or register to reply here.
Back
Top