hey i am wiring a switch for my low speed cooling fans through the relay. so the switch i have is a lighted switch and say neg, acc, pos. my wires coming from the relay one is always hot. so i assume to plug the wire thats always hot into the postive, the other wire coming from the relay that isnt hot into the acc, and the negative i just wired a ground from the ebrake bolt. so i am able to hook everything up and it was working but the i noticed the light went out and it ended up blowing the cooling fans 30 amp fuse which was like 4$.
also it was working fine when i would just connect the two wires manually from the relay for a while without blowing any fuses, so it seems that the ground is letting battery voltage to the cooling fans circuit or something, if anyone knows anything let me know.
also it was working fine when i would just connect the two wires manually from the relay for a while without blowing any fuses, so it seems that the ground is letting battery voltage to the cooling fans circuit or something, if anyone knows anything let me know.
