• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Coolant leak behind crankshaft?



yeah id say you look ok to use the 97 -03 lca's.

maybe wait till tomorrow and see what others have to say, but im thinking you'll be ok with them.
 
It just depends if it'd clear the sway bar mount on the LCA.

Look at your car and see how close the sway bar/link comes to the LCA.
 
See in the pic..there are three things near the ball joint. On a 97-03 those are factory rivets. You drill them and the old ball joint comes out. Then the new one bolts into place.

04+ like I said..I am unsure. I'm not looking at one.
 


Gotcha, thanks for the explanation. I'm not well versed in auto parts (getting there), but I can tell you all about computers and networks :D
 
Replaced my elbows this afternoon, got it up to temp with the pump and heat going and no leaks!

What my problem elbow looked like
p621vm.jpg


Point of failure
Dh1m7m.jpg


Going to do a proper coolant flush tomorrow when the coolant is cold. I can take pics of the LCA/sway bar link then.
 
You must log in or register to reply here.
Back
Top