• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

coolant elbows



depends on the tensioner bracket thats on there i guess.

I always thought they all had two.

I can tell you 99+ will for sure have two regardless of which engine it was.
 


Pick up Dorman 47065 for the two elbows and you'll either use one elbow and the large o-ring off the second or both elbows. Etiher way..you'll want to spend the $4 to get both. :th_thumbsup-wink:
 
dude, that's not what i'm asking. since all other motors use 2 coolant elbows, i'm asking if this would change anything up from a normal top swap.

i've read that **** plenty of times.
 


You're going to be using the same alternator bracket as the one you have unless you want to get a newer one so it'll be the same as for whatever alternator bracket you use.
 
You must log in or register to reply here.
Back
Top