Coils, icm postion after intercooler installed

[samuelcb409]

Is there a certain way to mount the icm, coils on a angle so doesnt hit the sc belt

 

[BoostenGTP]

just loosen the top bolts and put washers behind them and tilt it up. That's what I did and it works great. Or get the bonneville bracket, which I plan on installing soon.

 

[Sven the Sexman]

Or get the bonneville bracket, which I plan on installing soon.

That's what I'm doing. I custom made a metal P/S upper engine mount because the necessary aluminum L36 Impala upper mounts break too easy. Keep that in mind.

 

[Pure2sin]

Go to the hardware store and look for bolt spacers, then get a longer bolts for the ICM bracket.

 

[samuelcb409]

I had it done a while back but just installed a cam and when i idle it makes a squeaky noise and tried to tighten the washers but still has little play side to side so maybe the bolt aint fitting right

 

[samuelcb409]

Is it had to install the bonneville bracket

 

[Tengis]

Sam - every intercooled car youve ever seen in person had their coil packs spaced the way I did yours =p. Next time I see you I will check it out and make sure its tight and not squeaking. .

 

[Tengis]

Go here and view the second PDF called "S2 S3 Intercooler installation instructions v.2.pdf". ZZPs instructions actually show what I did to yours.
http://s3.amazonaws.com/zzpstorage/instructions/S2+IC/S2+IC+Install.zip