• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Clunk in driver side suspension

S

ScottCa

New member
I have a clunk going over bumps have replaced lower control arm bushing,sway bar links and bushings and quick struts. Noise is still there ball joints are good replacing outer tie rod ends next. Anyone ever experienced anything similar any info would help I'm at my wits end with this. Thanks
 


ScottCa said:
I have a clunk going over bumps have replaced lower control arm bushing,sway bar links and bushings and quick struts. Noise is still there ball joints are good replacing outer tie rod ends next. Anyone ever experienced anything similar any info would help I'm at my wits end with this. Thanks
Click to expand...

sub frame bushings
 
ScottCa said:
Can they be bad and not look it?
Click to expand...

Yes they separate and its hard to see while installed. They are part of the suspension and they wear out just like the rest of it. I see it becoming very common on these cars has the get to be 10 plus years old.
 
Make sure the bolts on the diagonal braces in the engine bay are good and tight. I have had them make some noises too.
 


You must log in or register to reply here.
Back
Top