• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

check engine light goes on and off!!

stanggreg90

stanggreg90

New member
i brought it to autozone and the scanner said bang 1 running lean so i put a new o2 senser in and did spark plugs and wires and it still comes on when it wants to so i brought it back to autozone after i did the parts and it still says the same think im going nuts please help its a 2000 gt thanks
 


You have a vacume leak somewhere.


Check all of your vacume lines to start with. If you still can't fins anything then it may be an intake gasket

Let us know.
 
Carb cleaner while the engine is running. You have a vacume leak. It's just hard to find. It could be a slight crack in a hose that you can barley see. But you have one. Also check the evap silinoid. It's the one by the firewall with 2 cases and connectors running to it. Check it where the hoses connect to the silinoid. Sometimes the clips break and the hose looks like it is on there but it's not.


When you spray the carb cleaner on all of the hoses and you hear a raise in the idle you have your leak.
 


Check that damn T-Fitting vacuum line. It runs from the fuel rail under the Upper Manifold to the side of the Lower Manifold and back to EVAP Canister...try those...they are always the first things to go...dry rot FTL.
 


Do you have acces to a tuner or scanner. When I had mine the only way we could find it was be using carb cleaner. When you find it your STFT will go to zero for a second... also could be a bad MAF sensor. Try cleaning it.
 
You must log in or register to reply here.
Back
Top