• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

ccfls are here now i have color scheme questions.

BoostJunki3

BoostJunki3

Needs A Turbo
so the halos are about a 6k color as that match my 6k HIDS.

i have to decide whether to get switchbacks for signals and white led sidemarkers wit 3k fogs.

or

6k matching fogs with amber LED signal/sidemarkers.....
 


got them from ebay ..... sprinter was the seller name....they seem alot nicer than my LEDS did and have black corners....i did the cluib gp no bounce mod and put some new weather stripping on and they are perfect....getting some switchbacks for them too then they will be hotttt :)
 


i finally did anti bounce on the ones u posted in the appearance section... im very happy with them in the end.
 
BoostJunki3 said:
got them from ebay ..... sprinter was the seller name....they seem alot nicer than my LEDS did and have black corners....i did the cluib gp no bounce mod and put some new weather stripping on and they are perfect....getting some switchbacks for them too then they will be hotttt :)
Click to expand...

Boost why dont you get 6k fog and white/amber switchbacks, thats what i'm running and I like the way they look . If you want I can post up a vid to show you how they look. Oh by the way when you use the shrink tubing make sure no moisture can get in the connectors, if moisture does get in the connector(s) the ccfl will not light properly. I ended up using electrical tape on each end to help seal the connectors.
 
100_4159.jpg


they are bright ass halos.....and rojo thanks i am going option 1 with switchbacks and 3k fogs.....and gtpinsc get automotive weather stripping from home depot and stick it to the bottom of the HL's you will have ZERO BOUNCE i can hardly move mine.
 
yea thats what i did... i got it from lowes though and it fit all the gaps perfect... i have no bounce at all. i also did the electrical tape on the the little plastic clips that mount lights to mounting frame.
 


gtpinsc said:
yea thats what i did... i got it from lowes though and it fit all the gaps perfect... i have no bounce at all. i also did the electrical tape on the the little plastic clips that mount lights to mounting frame.
Click to expand...

did you do the nylon/rubber washer on the lower pivot mount?
 


look at the link above i think your thinking of a diff piece possibly, i dont see how you coudl wrap what im talking about with electrical tape and have it be effective.
 
yea i kno what ur sayin,.. look at picture of bracket fig. A.. i wrapped tape around the gold screw... hard to explain how i did it... but it worked.
 
You must log in or register to reply here.
Back
Top