• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Carbon fiber wrap

found the 60x60 roll on ebay for $30 so i probably go head and do that for the hood.
grabbed a trunk lid from the same car this week as well. honest opinion. wrap it or
paint it black(car color)
 


If you can afford to get it painted, I'd go with that. I just recently wrapped a 40th/limited edition spoiler and it took me just over 4 hours, and was one of the hardest things I've wrapped yet.
 
Be less lost.

IMG_20140205_185050_291_zps84fb185c.jpg


IMG_20140205_185703_798_zps16dde85a.jpg
 


The number of conflicting, complex curves. And they are all in close proximity so you really have to plan where you heat and were you stretch accordingly. I used a 5ft x2ft section and had a small amount of scrap left.
 
I've only used it a bit in matte black, and it worked well, but it's pretty easily glossed by heat (heating matte vinyl is tricky, too much will make it shiny)

It stretches and conforms well though.
 
You must log in or register to reply here.
Back
Top