• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Can L36 short blocks be used in an L67??

GOTIT4CHEAP16

GOTIT4CHEAP16

New member
Just wondering since i threw rods in my l67, can just replace it with the short block from my old l36? If so, what size pulley should i use? I know the stock on it now is like 3.8. And where could i buy the larger pulley from?
 


Thanks so much matt. I appreciate it. Im going to tell the shop to swap the short block from my l36 into my l67 tommorow and i will then order my headers tommoroow also. This will at least allow me to get my car back on the road again and give me time to get a l67 short block for later use just in case. Appreciate it matt. Can i still drop pulleys at the same modded rate as normal?
 
if you want to drive your car after the swap i suggest leaving the blower belt off and avoiding WOT till you get it street/dyno tuned.

You have to drop pulley's slower because of the higher compression.
 
You must log in or register to reply here.
Back
Top