• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Camber Bolt question for Lowering springs

9

92builtbird

New member
Hey guys,

I am about to purchase some camber bolts for my lowered GP but I have a quick question. I plan on going with the AC delco brand. When I had an alignment in the fall, my camber was showing -2.5 our on the rear left, and -2.2 on the rear right. Will I need 2 camber bolts per strut in the rear to bring this out. I don't know if there will be enough adjust-ability with just the 1 on top.

Thanks.
 


Gotcha. I'll go with 1 per side. Will I notice a huge difference if they can bring me in to -1.5 all around, as opposed to centering me out at lets say -1.1-1.2?? My guess is probably not.
 
you won't notice the difference, but 2.5* is a lot for a daily driver when you don't need the clearance.
 
the top is the typical place for it to go, yes.

but to be serious, you can use it on top or bottom because i know a few people that use two camber bolts in order to get more camber to fit their huge wheels.
 


You must log in or register to reply here.
Back
Top