c5 vette calipers installed

[mechguy]

C5 rotors are 12.8" vs 12" F-body rotors. So you will be gaining quite a bit of stopping ability vs the antiquated F-body.

Front.

Edit: But that makes it hard to believe the C5's are lighter, though I haven't checked, since my wimpy 16" wheels will not allow 12.8".

 

[Ridin ON Chrome]

C5 rotors are 12.8" vs 12" F-body rotors. So you will be gaining quite a bit of stopping ability vs the antiquated F-body.

Front.

Edit: But that makes it hard to believe the C5's are lighter, though I haven't checked, since my wimpy 16" wheels will not allow 12.8".

GXP rotor

OD 12.72
Height 2.06
1.26 nominal thickness
1.18 minimum thickness
Hub register 2.78
bolt hole size .57
bolt hole circle 5 x 4.53
24 lbs
76-101$

C5 rotor

OD 12.79
Height 1.79
1.26 nominal thickness
1.19 minimum thickness
Hub register 2.78
bolt hole size .53
bolt hole circle 5 x 4.75
19 lbs
48-53$

F-Body LS1

OD 11.92
Height 2.04
1.27 nominal thickness
1.21 minimum thickness
Hub register 2.78
bolt hole size .64
bolt hole circle 5 x 4.65
17 lbs
48-112$

12'' W-body

OD 11.92
Height 2.04
1.27 nominal thickness
1.21 minimum thickness
Hub register 2.78
bolt hole size .64
bolt hole circle 5 x 4.65
17 lbs
48-112$




C5 rotors will work but you will need the bracket from KORE3

Its a better upgrade then the GXP since the rotors are way lighter.

 

[boostedcompg]

^that

 

[mechguy]

Sry, I thought F-body rotors were being compared to C5.

 

[boostedcompg]

so my deal i was waiting on for some 19's was taking way to damn long so i just got some nice rotors to replace the oem stuff. nothing too fancy, once i find wheels ill be going with the vette rotors. but until then these will do. gonna end up doing gxp rears as well. while i know it wont make any stopping difference, it will looke a **** ton better.

 

[Ridin ON Chrome]

sweet