• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Brake Booster

grandamle91

grandamle91

New member
Is there write up or videos on changing the booster. My car had a engine fire from my headers. Can't figure out how the booster goes on

Sent from my Nexus 7 using Tapatalk
 


most bolt on from the inside the car, take the mater off the booster and the vac tube.

inside un clip the rod from the brake pedal, and unbolt the 4 booster bolts from the firewall. should come right off.
 
im not finding many pics of it. but this one looks to have a locking lever maybe of some sort.

$T2eC16ZHJHgE9n0yG+pDBQG0T7)1cg~~60_3.JPG


the booster needs to be tight and secure as that rod there hooks to the brake pedal, when you push the brakes, that rod pushes into the booster then the master.

found at this link, its cheap at 25 bucks too. http://www.ebay.com/itm/97-98-99-00-GRAND-PRIX-POWER-BRAKE-BOOSTER-9530-/120962010752
 
does that leaver move, and move anything else?

seems you need to lock it to the fire wall some how. maybe its a put it in and turn it a little one way then it locks?

if yours fell out during the fire. id check the new one next to the old one, then see if maybe the firewall is damaged.
 


I'll do that when I get home, I was looking in my service manual but can't find much on the booster

Sent from my Nexus 7 using Tapatalk
 
You must log in or register to reply here.
Back
Top