• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Boostjunki3: Help

bbptech

bbptech

New member
Im wondering what kind of weather stripping u used on your halo projections? And other things u did to solve the bounce.

Thanks,
bbptech
 


ya ive done that mod and it still bounces some. seen boostjunki3 did some different weather stripping on the housing and it fixed his prob. the bounce just gets annoying since i have HID's
 


just get automotive weather stripping from home depot and rip the original bull shyt off the corners too and wrap the corner and whole underneath of the light with the thicker stuff....another thing i did to get rid of the gap on the inside in this pic below is i grinded the mounting bolt holes for the head light back and in so the light is firm against the frame and further in to get rid of the ugly gap on the inside edge of these lights (thats no pictured here ill get some today or will try)

100_3590.jpg
 
heres what i was talking about see how i enlarged the hole up and in....i just drilled another hole really close and grinded out the the piece between the holes then painted it so it wouldnt rust.

472549836_1653739889_0.jpg
 




You must log in or register to reply here.
Back
Top