• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

blue interior led (pics)

does anyone have the write up on how to change the leds and what ones to use with what resistors for the dash lighting, door switches, or the hvac controls?
 


No write-up needed. Disassemble the switch, desolder the bulb, solder in the LED and resistor (use the formula I posted earlier in this thread to decide what resistor to use). Just make sure you use 14.4v as you voltage in the formula not 12v (since the system is at 14.4v when the engine is running and you don't want to over drive and burn out your LEDs).

Consult a service manual with wiring diagrams to decide the polarity of the LED. I used 3mm 13000+mcd LEDs.
 
Cyko said:
I did this on my old Lumina and changed all the bulbs to green in the dash/hvac... this site here: www.autolumination.com Tail Light Brake Light Turn Signal LED Bulbs sells the correct wedge bulbs to just swap out, and the 194bulbs, and PC-194 bases to stick 'em in (for the dash) so you don't hafta solder anything... VERY simple to do... if I had pictures still I'd post up, but it's real easy, with nice results.
Click to expand...

I doubt that will work. Unless the GP is very different from the Impala in that respect. All of the bulbs in the dash and switches are soldered in. There are no wedge bulbs or any really end-user serviceable bulbs at all. That's why this is a popular mod because if the factory bulbs burn out you have to solder anyway.
 


I want to say it's about 25, changing the bulbs in the cluster, and hvac though won't help the plastic is orange
 
change the overlays, I am working on getting a company to make them (I have one ready to go, and another as backup)
 
That would be sweet, let me know whatever else comes of that, I'm interested I wanna get all the interior lighting to be blue instead of the lame old pontiac orange
 
Yeah, GM loves to tint the overlays to get the right color. They used yellowish bulbs behind a blue overlay to achieve the Impala/Monte factory colors.

If you took white LEDs/bulbs and stuck them behind the factory cluster it would glow blue. Even though I have a new overlay, I still have white LEDs behind it and it still glows blue. The red warning areas and red needles look GREAT that way.

http://img.photobucket.com/albums/v317/sabrewings/backup/DSC02267.jpg
 


that is freakin sweet, thats what I want the whole dash and buttons on my car to look like. So I just need to replace all the factory leds with white ones and I'll get that same effect?

What would I have to do to change the needles to glow like white or some other color
 
GOINDEF said:
that is freakin sweet, thats what I want the whole dash and buttons on my car to look like. So I just need to replace all the factory leds with white ones and I'll get that same effect?
Click to expand...

According to archemedes your factory overlay is tinted reddish/orange so you need a new overlay that will allow for these colors.

GOINDEF said:
What would I have to do to change the needles to glow like white or some other color
Click to expand...

Find new needles.
 
Sabrewings said:
I doubt that will work. Unless the GP is very different from the Impala in that respect. All of the bulbs in the dash and switches are soldered in. There are no wedge bulbs or any really end-user serviceable bulbs at all. That's why this is a popular mod because if the factory bulbs burn out you have to solder anyway.
Click to expand...

With respect, is that the same scenario for the gauge cluster and the hvac lights?

On the lumina (I assume it can't be TOO different for many cars) it called for 6 PC-194 quarter-turn bulbs (a 194 with a base that it sat into, which kinda screwed so to speak into the circuit board) and the HVAC bulbs were... 37's? Two to be exact... I never looked at the door switches or anything. Sorry if I caused some confusion. Autolumination.com DOES sell some really cheap pre-resisted LED's as well though.


In regards to the question about changing the needle colors... I would think you'd need replacement needles for that.
 
Cyko said:
With respect, is that the same scenario for the gauge cluster and the hvac lights?
Click to expand...

That's what I was referring to when I said "bulbs in the dash" meaning the gauge cluster and the HVAC.

Cyko said:
On the lumina (I assume it can't be TOO different for many cars) it called for 6 PC-194 quarter-turn bulbs (a 194 with a base that it sat into, which kinda screwed so to speak into the circuit board) and the HVAC bulbs were... 37's? Two to be exact... I never looked at the door switches or anything. Sorry if I caused some confusion. Autolumination.com DOES sell some really cheap pre-resisted LED's as well though.
Click to expand...

The factory 00-05 Impala/Monte radio, gauges, and HVAC controls use thin wheat style incandescent bulbs soldered to the PCB.
 


98GT3800 said:
stupid question. What kind of resistor is ior size i guess. and do you need it for all l.e.d bulbs
Click to expand...

The resistor you use depends on what LED you use (see the Ohm's law formula I posted previously in this thread). Resistors are required for any LEDs that don't have a built in resistor.
 
You must log in or register to reply here.
Back
Top