• Failure to follow these rules may result in your threads being locked, deleted, or moved. Depending on the severity of your actions, or frequency of your actions, your user account could be suspended or banned. These rules are to help protect both buyer and seller.


    1. CONSOLIDATE all of your for sale items into ONE thread only. This means there will be NO making multiple sales threads for different items regardless if the parts are related or not.

    2. PRICE IS REQUIRED. We do not permit ads without an asking price for each item. "Best Offer" is not an allowable substitute for posting a price. You may ask for $1 but a price must be listed regardless. If a price is not listed with in the first 24 hours of making your sale thread IT WILL BE LOCKED or DELETED. Once a price is listed a bidding war is not permitted. If the seller gets an offer that meets his asking price, the seller should honor the asking price and sell for that amount.

    3. EBAY LINKS AND OTHER LINKS. We allow links to ebay ads, but you MUST have a buy-it-now price posted, or an asking price to stop the auction in your ad here (Not just in the link). If it is from another site or from here, do not use a link but post the full text instead with pictures if you have them listed. If a BIN price is not posted, then your thread will be DELETED.

    4. CITY / STATE are required info for each ad. Information must be posted in the first post of thread, NO EXCEPTIONS. Buyers and sellers reserve the rights to privately ask for full contact information on any purchase or sale. 24 hour notice will be given, if you do not comply your post will be DELETED.

    5. NO TWO PARTY SALES. This means no more "I'm selling for a friend" posts and will be deleted immediately with no notice. Seller assumes all responsibility of anything they post for sale.

    6. NO FEELER THREADS. You are either selling it or you aren’t selling it.

    7. POST COUNT AND/OR TIME LIMIT. We are requesting that you spend some time with us before you start a For Sale thread. A pre-determined minimum number of posts will be required or 1 year since creating the account + an intro thread (just so we know you aren’t the Prince of Africa). Any for sale thread posted out of the For Sale section to circumvent the rules will result in being deleted. Those who do meet the criteria and post outside the section will have their thread moved, constant violation of this will result in an infraction.

    8. NO BUMPING OR TT’ing YOUR THREAD MORE THAN ONCE IN 48 HOURS. Don’t worry your thread will still be a bold read until a user reads it and if people are really interested they will let you know. Post warning will be issued if in violation and on the 3rd warning, the thread will just be locked.

    9. NO THREAD DUMPING OR I DON’T LIKE YOUR PRICE. Don’t post in a person’s thread just to tell them they are too high, either move along and say nothing or throw an offer to them. The person can sell it at whatever price they think someone is willing to pay. Offenders will be issued a warning, if it is a constant issue then an infraction will be issued.

    10. KEEP YOUR THREAD UP TO DATE. This is really for your benefit, so you don’t get 10 PMs asking if you still have it when you already sold it.

    11. NO WEAPONS. As Admins we have determined that no weapons will be allowed to be sold, this includes knives, guns and anything else deemed a weapon (even if its a wall hanger only). We ask that if you want to sell these items you seek out the appropriate websites elsewhere to do so.

    12. Pictures are REQUIRED. Pictures of all items for sale. This is to help BOTH seller and buyer. As a seller it is MUCH easier to sell something if you have pictures of it. As a buyer you feel better seeing exactly what you are buying. Pictures should contain the item/s for sale and a sign of some kind that has your username on it. 24 hour notice will be given, if you do not comply your post will be DELETED.

    FRAUD & RISK. Buy and Sell at your own risk. Grand Prix Forums and its staff are not responsible if someone rips you off or doesn't send parts out in a timely manner. This classifieds section is a free service for the community, and it is YOUR responsibility to handle all transactions in a low-risk method. DO NOT contact us if there is a dispute between you and someone else, we are NOT INVOLVED. You can help minimize fraud risk by doing these suggestions:

    Pay using PAYPAL, using a credit card. This way, if a part does not arrive, you can do a charge back through your credit card company. If you gift it, then you have no recourse to get your money back when things fall through. Pay the 3% and have the buyer protection. Using someone else's paypal and gifting to pay for goods is violating Paypal's Terms of Service.



    Always ask for full name, residential address, phone numbers of both buyers and sellers. An honest seller should have no problem disclosing this info to you privately.


    Shipping things C.O.D. is risky. Try to use UPS or Fedex, so that you can track shipments. Have someone sign for it if it is expensive.


    Ask for references from other members, hopefully from other members who have been registered for longer than one year and are active here.


    Use your gut feeling. If something seems too good to be true, or a seller/buyer seems a little shady, don't take the risk.

    TIPS:
    -Post pictures: with mobile phones these days and auto uploads, it’s not even really hard anymore. Have it automatically drop in Photobucket, grab the Img tag link and paste it in.

    -Give good contact information if you aren’t going to be on here a lot.

    -If you are going to disappear for an extended time (vacation, time in jail, what have you), then give us a quick note that you aren’t going to be around. People will trust you a little more.

    -Look around and gauge your price with other items. Just cause you bought it for $1000, doesn’t mean it’s now worth $1,200 or even the original $1,000. You are free to ask what ever you want, but an item that is priced right will sell quicker.
  • The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

BlownBigBlock's Trunk Lid Mats.

Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

Well then....An "exacto" knife should give you an "Exact" fit!!! :th_winking:

I'll be watch for your results!!!
 


Re: BlownBigBlock's Trunk Lid Mats. (40th Anniversary Mat Done)

Any new developments in the illumination front, I know you were trying some new things, wanted to hear/see how your ideas turned out!

This is what I'm referring to, the only difference is the red felt was added to the back piece. Not sure if a higher intensity inverter would take care of it, a combination of larger wire and higher inverter, or possibly using a different material. Compare this to the picture a few posts earlier. If you were a few feet away, it didn't look bad, but not nearly the brightness as the one using just the white foamboard setup. Possibly using a white glo-wire might help also, just gotta decide what I want to do.

P1010200.jpg
 
Re: BlownBigBlock's Trunk Lid Mats. (40th Anniversary Mat Done)

Any new developments in the illumination front, I know you were trying some new things, wanted to hear/see how your ideas turned out!

Nah, I kinda backed off it for a little bit, will regroup shortly and see what I can come up with. Looked at LED ropes, but in most cases it's only in bulk. So still still looking. Also may do LED's with etched plexi...
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion, and bbptech lid)

Talked to Colin last night about a trunk lid mat, currently the UPS store is enlarging the emblem, going to try a different approach on this one, has detail to it, but think I can still do it in a felt... Cover will be black, emblem white with a black background, the emblem I'm hoping will come in at around 9.5" high and around 21" wide.

Finishing one up for Cody (Gafford44), hope to have Colin's done late next week.

srh_hi.jpg
 


Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion, and bbptech lid)

Talked to Colin last night about a trunk lid mat, currently the UPS store is enlarging the emblem, going to try a different approach on this one, has detail to it, but think I can still do it in a felt... Cover will be black, emblem white with a black background, the emblem I'm hoping will come in at around 9.5" high and around 21" wide.

Finishing one up for Cody (Gafford44), hope to have Colin's done late next week.

srh_hi.jpg

:th_winking:
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

oh man i cant wait to see how that spade is gonna turn out Keith.
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

As promised, here are the pics of my GTX trunk mat that Keith made for me. I will let the pics do the talking...
misc119.jpg
[/URL] Uploaded with ImageShack.us[/IMG]
misc120.jpg
[/URL] Uploaded with ImageShack.us[/IMG]
 


Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

Well, up at the GF's for the weekend, thought in our off time of not being out, would try and do bbptech's center section. Wanted to try something different, plus doing it this way may help in doing another one I'm doing that has detail to it. So I stopped at the hobby store for some supplies. I cut out the black, then cut out the white, it's all in felt, the white are individual pieces, didn't want to lay the black just over a white piece although would of been alot easier. I'm hoping I can fix a screwup, my trace color bled thru, waiting for the glue to dry - if it's still there going to try and fix with fabric paint or similar.

Btw - I started with a 6x8 pic... It's now 24"x9.5".
colinsmat.jpg
 
Last edited:
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

damn that looks so good. cant wait to see that on my car. ^X2, outstanding work Keith!!!
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

actually a can of scotch guard might go along way to keeping them looking fresh and water repellent.
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

So Keith, you say you're putting off the backlighting because when you wrap the foam in fabric, the light dims, right? Well if I'm understanding right couldn't you just put something like aluminum tape or whatever on the back of it around the lighting so it projects out more? I've been keeping yours in mind for a while since they'd be a ton lighter than the other ones made out of plywood or whatever. I want to see where you go with the whole backlighting thing...
 


Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

So Keith, you say you're putting off the backlighting because when you wrap the foam in fabric, the light dims, right? Well if I'm understanding right couldn't you just put something like aluminum tape or whatever on the back of it around the lighting so it projects out more? I've been keeping yours in mind for a while since they'd be a ton lighter than the other ones made out of plywood or whatever. I want to see where you go with the whole backlighting thing...

Sheepdog,

Thanks for being patient, I'm down to making 3 more mats, another is shipping today then I'll have some free time to experiment, hope to have the other 3 done late next week if all goes to plan (how often does that happen?) was in Radio Shack the other day looking at available LED's etc, along with looking on the net on wiring possibilities. It doesn't look difficult, just never played with them, so look for something in the very near future. :th_winking:
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

Becoming a little more comfortable with trying to get more detail, granted I won't ever be able to reach the detail of a vinyl decal, but don't think it came out too bad. Still have to build the cover around it, cover opening will hug the letters close, and I didn't just place the black over the silver.

P1010206.jpg


P1010207.jpg


P1010208.jpg
 
Re: BlownBigBlock's Trunk Lid Mats. ("Supercharged" design opinion)

Okay Keith, sounds good :th_thumbsup-wink:

tosche! the others made out of "waferboard" average weight remains less than ten lbs which is a "ton" less than the max the push tabs and trunk cylinders will support. :th_thumbsup-wink:

Well, I know you make mats too, and I don't want to be be putting anyone down, but I'm just particular about adding weight. In the same category, I would like to put subs in my car, but I probably never will because I don't want the weight. You do make some really nice stuff though :th_winking:
 
Re: Any interest in something like this?

Was just messin' around, went over to the UPS store to see what type of sizing I'd get. I think it's possible I could still do it in the felt, recessed, just more detail work.

GTPemblem.jpg


I didn't ask for italized, so that's kinda messed up, but you get the idea... Would need to select a trim color, "GTP" color, and the "Supercharged" lettering color. I "think", using that term loosely I could do it.

GTPSupercharged.jpg
 
Back
Top