• Failure to follow these rules may result in your threads being locked, deleted, or moved. Depending on the severity of your actions, or frequency of your actions, your user account could be suspended or banned. These rules are to help protect both buyer and seller.


    1. CONSOLIDATE all of your for sale items into ONE thread only. This means there will be NO making multiple sales threads for different items regardless if the parts are related or not.

    2. PRICE IS REQUIRED. We do not permit ads without an asking price for each item. "Best Offer" is not an allowable substitute for posting a price. You may ask for $1 but a price must be listed regardless. If a price is not listed with in the first 24 hours of making your sale thread IT WILL BE LOCKED or DELETED. Once a price is listed a bidding war is not permitted. If the seller gets an offer that meets his asking price, the seller should honor the asking price and sell for that amount.

    3. EBAY LINKS AND OTHER LINKS. We allow links to ebay ads, but you MUST have a buy-it-now price posted, or an asking price to stop the auction in your ad here (Not just in the link). If it is from another site or from here, do not use a link but post the full text instead with pictures if you have them listed. If a BIN price is not posted, then your thread will be DELETED.

    4. CITY / STATE are required info for each ad. Information must be posted in the first post of thread, NO EXCEPTIONS. Buyers and sellers reserve the rights to privately ask for full contact information on any purchase or sale. 24 hour notice will be given, if you do not comply your post will be DELETED.

    5. NO TWO PARTY SALES. This means no more "I'm selling for a friend" posts and will be deleted immediately with no notice. Seller assumes all responsibility of anything they post for sale.

    6. NO FEELER THREADS. You are either selling it or you aren’t selling it.

    7. POST COUNT AND/OR TIME LIMIT. We are requesting that you spend some time with us before you start a For Sale thread. A pre-determined minimum number of posts will be required or 1 year since creating the account + an intro thread (just so we know you aren’t the Prince of Africa). Any for sale thread posted out of the For Sale section to circumvent the rules will result in being deleted. Those who do meet the criteria and post outside the section will have their thread moved, constant violation of this will result in an infraction.

    8. NO BUMPING OR TT’ing YOUR THREAD MORE THAN ONCE IN 48 HOURS. Don’t worry your thread will still be a bold read until a user reads it and if people are really interested they will let you know. Post warning will be issued if in violation and on the 3rd warning, the thread will just be locked.

    9. NO THREAD DUMPING OR I DON’T LIKE YOUR PRICE. Don’t post in a person’s thread just to tell them they are too high, either move along and say nothing or throw an offer to them. The person can sell it at whatever price they think someone is willing to pay. Offenders will be issued a warning, if it is a constant issue then an infraction will be issued.

    10. KEEP YOUR THREAD UP TO DATE. This is really for your benefit, so you don’t get 10 PMs asking if you still have it when you already sold it.

    11. NO WEAPONS. As Admins we have determined that no weapons will be allowed to be sold, this includes knives, guns and anything else deemed a weapon (even if its a wall hanger only). We ask that if you want to sell these items you seek out the appropriate websites elsewhere to do so.

    12. Pictures are REQUIRED. Pictures of all items for sale. This is to help BOTH seller and buyer. As a seller it is MUCH easier to sell something if you have pictures of it. As a buyer you feel better seeing exactly what you are buying. Pictures should contain the item/s for sale and a sign of some kind that has your username on it. 24 hour notice will be given, if you do not comply your post will be DELETED.

    FRAUD & RISK. Buy and Sell at your own risk. Grand Prix Forums and its staff are not responsible if someone rips you off or doesn't send parts out in a timely manner. This classifieds section is a free service for the community, and it is YOUR responsibility to handle all transactions in a low-risk method. DO NOT contact us if there is a dispute between you and someone else, we are NOT INVOLVED. You can help minimize fraud risk by doing these suggestions:

    Pay using PAYPAL, using a credit card. This way, if a part does not arrive, you can do a charge back through your credit card company. If you gift it, then you have no recourse to get your money back when things fall through. Pay the 3% and have the buyer protection. Using someone else's paypal and gifting to pay for goods is violating Paypal's Terms of Service.



    Always ask for full name, residential address, phone numbers of both buyers and sellers. An honest seller should have no problem disclosing this info to you privately.


    Shipping things C.O.D. is risky. Try to use UPS or Fedex, so that you can track shipments. Have someone sign for it if it is expensive.


    Ask for references from other members, hopefully from other members who have been registered for longer than one year and are active here.


    Use your gut feeling. If something seems too good to be true, or a seller/buyer seems a little shady, don't take the risk.

    TIPS:
    -Post pictures: with mobile phones these days and auto uploads, it’s not even really hard anymore. Have it automatically drop in Photobucket, grab the Img tag link and paste it in.

    -Give good contact information if you aren’t going to be on here a lot.

    -If you are going to disappear for an extended time (vacation, time in jail, what have you), then give us a quick note that you aren’t going to be around. People will trust you a little more.

    -Look around and gauge your price with other items. Just cause you bought it for $1000, doesn’t mean it’s now worth $1,200 or even the original $1,000. You are free to ask what ever you want, but an item that is priced right will sell quicker.
  • The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

BlownBigBlock's Trunk Lid Mats.

Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

the blue GTP look awesome:th_thumbsup-wink: i like the loud blue color. if i drive i gp then definitely i buy buy one:). for now i'm waiting for jarhead to finish up mine. it's gonna be freaky & creepy awesome looking.:eek::eek:
 


Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

sent you a pm bigblock. got the material and will probably ship it to you. one thing im worried about. since it is just foam board, how do you strengthen the inside of the "P" and "G" etc in gtp? looks like it would get really flimsy.
 
Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

First off, would like to thank JarHead for chiming in on the questions. I never thought of using Velcro because of the possibility of it pulling from the foam board. You could try it, but please don't hold me responsible if the foam board was to rip.
 
Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

sent you a pm bigblock. got the material and will probably ship it to you. one thing im worried about. since it is just foam board, how do you strengthen the inside of the "P" and "G" etc in gtp? looks like it would get really flimsy.

The two that I did seem to be pretty sturdy once the fabric material is glued onto them. For a little more insurance, could always put on a piece of folded masking tape in between (basically a double sided tape effect) to offer a little more security
 
Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

First off, would like to thank JarHead for chiming in on the questions. I never thought of using Velcro because of the possibility of it pulling from the foam board. You could try it, but please don't hold me responsible if the foam board was to rip.

yeah, i didnt think of the board if you tried to take it off. you could if you did it slowly... as far as it holding the board up, double sided velco is pretty stong. i have some holding my 2 gauge pod and 2 gauges in place. its strong and takes a good amount of pulling to take it off.

The two that I did seem to be pretty sturdy once the fabric material is glued onto them. For a little more insurance, could always put on a piece of folded masking tape in between (basically a double sided tape effect) to offer a little more security

yeah, i was wondering that myself. the letters there looked flimsy. I thought you might have taken some tape or glue and glued them down. if it were my trunk lid, i would secure those parts of the letters.
 
Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

the blue GTP look awesome i like the loud blue color. if i drive i gp then definitely i buy buy one. for now i'm waiting for jarhead to finish up mine. it's gonna be freaky & creepy awesome looking.

whats wrong with the black SS one you have? that looked good
 


Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

yeah, i was wondering that myself. the letters there looked flimsy. I thought you might have taken some tape or glue and glued them down. if it were my trunk lid, i would secure those parts of the letters.

I have taken my board off at least a 1/2 dozen times with no issues, but I've been quite careful when doing it. It regards to the "P" and "G", I need to stop by staples tonight and I'll see what they offer that I can use.
 
Re: BlownBigBlock's Trunk Lid Mats. (Pics of finished GTP mat up now)

Silver is looking for a theme panel to match art work under his hood as well as have it back lit with LED's

boy, and i thought i was picky...yet again, silver (ryan) is the guy who washed his car at the Branson meet when the thing looked like it had just been washed..i think it had a couple bugs on the front or something :th_laugh-lol2:
 
2nd version of GTP Trunk Lid Mat - laid out.

Since my first version font wasn't quite accurate. Had someone download a badge and proportionately (I think I spelled that right) the letters to fit the trunk lid mat. This is really rough, but you'll get the idea. The letters will be roughly 3 5/8" high, the width of the letters will be just shy of 32". Here's picture of a rough layout of how they will look. Excuse the "T", it's just the paper overlap.

GTPimage.jpg
 
Last edited:
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

Just finished this one up tonight for Tim aka "01 GT". It's a black trunkliner material with red lettering. I also bought some small velcro things to go between the material and the top board for the letter "G", will use them for the GTP too. It does help secure them... The little indents you see on top are where the push pins go thru, I didn't cut them out yet.

P1010142.jpg


P1010143.jpg


P1010144.jpg


P1010145.jpg
 
Last edited:


Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

I was thinking the same thing on the G and P and if they would start to sag while hanging upside down for a long time, I'm sure the velcro will take care of that no problem.

And personally I like the GTP font you used on the first two better than the one you show there, but it may look better when its finished, too.
 
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

damn, Keith :th_thumbsup-wink: these get better each one you do! i really like that black on red. black on silver would look hawt
 
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

damn, Keith :th_thumbsup-wink: these get better each one you do! i really like that black on red. black on silver would look hawt

The black liner material really laid out nice, it doesn't stretch as easily as the other stuff, but was nice to work with. The silver on black has your name written all over it... Decide about the car yet?
 
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

nah, not yet. im still planning on when to buy my struts :(

something that puzzles me is how you are getting the liner to wrap around the corners and insides of the letters so well.. are you laying the liner down on top of the pattern, then cutting, then folding it under the edges? i just dont see how you are doing the inside of the gt and stuff lol
 


Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

something that puzzles me is how you are getting the liner to wrap around the corners and insides of the letters so well.. are you laying the liner down on top of the pattern, then cutting, then folding it under the edges? i just dont see how you are doing the inside of the gt and stuff lol

With the cutout in the back for the felt piece and the fact the trunkliner stuff is stretchy, it's just tedious and somewhat time comsuming.
 
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

P1010142.jpg


Alright I think I made up my mind now, I want the GTP version of this. Do you have any GTP version of this complete yet?
 
Re: BlownBigBlock's Trunk Lid Mats. (New Color combo done, Black and Red)

I'm going to order one blown. Whats your paypal address?

I decided to not finish my creation
 
Back
Top