• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

best year for GTP, 98-2002.

Status
Not open for further replies.
kid? im probably older than you. and the injector harness clips are clearly not the same. the coolant bottle on the 98 is under the support beam where as 2000 and up, theyre right in front of the belt tensioner which makes changing belts overly complicated
 


kid? im probably older than you

Your not, 20 year old.

the injector harness clips are clearly not the same.

Then your clearly blind...because they are.

the coolant bottle on the 98 is under the support beam where as 2000 and up, theyre right in front of the belt tensioner which makes changing belts overly complicated

97-98's had the coolant bottle had the right.

Anything newer than that...they are on the strut tower.

It comes off with 2 10mm nuts.

It's easy.
 
well maybe the gtp's are different but ive got a 98, 2000, and 01 gt. 98 is under the support to the right. 2000, and 01 are between the panel and the belt. getting a wrench on there to get the belt off sucks
 


Isn't the intake performance setups different on the 83's and the 2010's for the 5.7 OHV VVT straight 8?

and the coupes are better looking. sorry to hurt your feelings friend

That might be your opinion youngin...but nothing in this thread makes sense that you say.
 
the stock intake is fine. its fenderwell. the only issue is the pcm placement and the tubing, which is slightly turbulent due to the ability of the engine to move in the compartment
 


yeah and the fuse bix takes litterally a minute to remove, but if i had to remove it evertime i wanted to change a fuse i would get pretty impatient
 


Status
Not open for further replies.
Back
Top